KATOOL, Mid Rise Scissor Lift Capacity 8000lb., Model# KT-X90e

Model: KT-X90e


Key Specifications

8000 lbs

Capacity

30 Sec

Rise Time

110V

Power

47.25”

Max Rise

🔧 Professional installation available — find a certified installer near you

$3299.99

  • Free Freight Shipping (Lower 48)

instock

– Ships in 2-3 Business Days

  • Verified Concrete Specs Included
  • Official Warranty

Fitment Check

Total Width

77.56”

Narrow Bay Compatible

Total Length

Standard Garage Depth

Min. Concrete

5.9”

Depth @ 3000 PSI

Min. Ceiling

For SUV parking below

Product Description:

The Lab Verdict

Executive Summary

76

/100

The Verdict:

The Katool KT-X90e is an 8,000-lb mid-rise scissor with an electric release — it raises to a comfortable working height for brakes, tires, and general service, then lowers electrically at the touch of a control, no manual valve to hold. Portable and space-saving. The KT-X85 is the standard-release version at a lower price; for full-height undercarriage access, the KT-X95 full-rise.

  • Who Should Buy It:
  • Brake, tire, and general service at a comfortable height
  • Mobile techs and space-tight shops (portable, stores flat)
  • Anyone who wants push-button electric lowering
  • Who Should Skip It:
  • Full undercarriage or exhaust work (needs a full-rise or two-post)
  • Buyers on the tightest budget (the KT-X85 costs less)
  • ⚠️ Lab Note:
Mid-rise means mid-height — you won’t stand under the car. It’s built for wheels-off and brake/tire work, not full undercarriage jobs.

Engineering Analysis


The “Deep Dive”

Hydraulics & Rise Time

An electric-hydraulic power unit raises the mid-rise scissor, with an electric release for hands-free lowering.

Safety Lock System

Automatic mechanical safety locks catch the carriages at intervals and hold the vehicle on steel stops rather than on hydraulic pressure.

Structural Integrity

Mid-rise scissor lift rated 8,000 lb with electric release — a portable, space-saving service lift for brake, tire, and general work.

The "Squeeze" Factor

This is the most critical section for the KT-X90e.

DRIVE-THROUGH WIDTH Check with manufacturer

Drive-through width data is not available for this lift. Please verify fitment specifications with the manufacturer before purchasing.

Fit & setup

Set on level concrete — a portable mid-rise needs no anchoring. Browse all scissor lifts.

KATOOL Mid ($3,300) vs. BendPak Low ($3,495)

Save $195.01 with the KATOOL

FeatureKATOOL MIDBENDPAK LOW
Lifting Capacity 8,000 lbs 6,000 lbs
Power 110V 110V

The Lab Take:

Both lifts are in a similar category. Your decision should come down to specific features that matter most for your use case.

The KATOOL offers a $195.01 savings while providing comparable specifications.

Year 1 Maintenance Schedule

Owning a lift is like owning a car. You can’t just install it and ignore it.

Weekly

Inspect the hydraulic cylinder for leaks. Check that all safety locks engage properly. Wipe down the platform and check for debris in the scissor mechanism.

Monthly

Lubricate pivot points. Check fluid levels. Inspect hydraulic lines for wear or damage. Test safety features and limit switches.

Yearly

Full hydraulic system inspection. Replace hydraulic fluid if discolored. Check all pivot pins for wear. Inspect platform surface for damage or warping.

Complete Technical Specifications


Specification

Value

Note

Lifting Capacity

8000 Ibs

Good for: Light Duty Trucks, SUVs, Sedans

Overall Length

77.56”

Measure from garage door to back wall

Overall Width

77.56”

Fits in standard single car bay

Drive-Through Width

Restrictive – tight for wide vehicles

Max Rise Height

47.25”

For car stacking calculations

Motor

Requires 30 Amp Breaker – NOT 110V compatible

Rise Time

30 Sec

Slower than 2-post lifts (30-40 sec)

Concrete Req.

5.9” Min Depth

Standard Residential Slab is usually 4″

Concrete PSI

3000PSI

Must be fully cured (28 days minimum)

Customer Builds

Real installations from real garages

Customer Install #1

Customer Install #2

Customer Install #3