BendPak 4-Post Car Lift, 9000-Lb. Capacity, Model# HD-9

Model: HD-9


Key Specifications

9000 lbs

Capacity

50 Sec

Rise Time

220V

Power

70”

Max Rise

🔧 Professional installation available — find a certified installer near you

$6095.00

  • Free Freight Shipping (Lower 48)

instock

– Ships in 2-3 Business Days

  • Verified Concrete Specs Included
  • Official Warranty

Fitment Check

Total Width

Narrow Bay Compatible

Total Length

Standard Garage Depth

Min. Concrete

4.25”

Depth @ 3000 PSI

Min. Ceiling

65”

For SUV parking below

Product Description:

The Lab Verdict

Executive Summary

80

/100

The Verdict:

The BendPak HD-9 is the 9,000-lb four-post lift at the center of BendPak’s storage-and-service line — the baseline its wider, longer, and taller variants all build on. Four posts and two drive-on runways mean no arms to set and enough stability to store a vehicle for months. It rises 70 inches for service or a second parking space underneath, reaches full height in about 45 seconds on a 220V circuit, and clears 86.5 inches of drive-through. If your bay fits the standard footprint it’s the value pick; if you need more room, step up to the extra-tall HD-9XW, extended HD-9XL, or tall-and-narrow HD-9STX.

  • Who Should Buy It:
  • Homeowners wanting to double their garage parking capacity
  • Car collectors who need to stack vehicles for storage
  • DIY enthusiasts who perform oil changes and basic maintenance
  • Anyone who wants the safest, easiest-to-use lift type
  • Owners of full-size trucks and SUVs
  • Who Should Skip It:
  • Users who need to do wheel-off suspension work (unless you buy bridge jacks)
  • Anyone without at least 4″ of cured concrete
  • ⚠️ Lab Note:
This unit requires a 220V/230V connection. Most homes do not have this outlet in the garage. You may need an electrician to install a dedicated circuit.

Engineering Analysis


The “Deep Dive”

Hydraulics & Rise Time

A 220V single-phase power unit raises both runways together to full height in about 45 seconds, with equalized cables keeping the four corners level through the travel.

Safety Lock System

Multiple mechanical lock positions hold the runways on steel stops at height, and because the load rides on the four columns rather than slab anchors, the HD-9 can sit loaded for long-term storage.

Structural Integrity

Standard service/storage/parking footprint: 9,000 lb, 70-inch rise, 88-inch columns, 200.5 inches long, 19-inch runways and 86.5-inch drive-through. CE-certified and backed by BendPak’s 5-2-1 warranty.

The "Squeeze" Factor

This is the most critical section for the HD-9.

DRIVE-THROUGH WIDTH 100.25"
CLEARANCE HEIGHT 65"

Let's do the math on a real-world scenario: 2023 Chevrolet Corvette.

Corvette Width (Mirrors Out): ~84"
Clearance: 8.1" per side
The Result:

It fits comfortably with plenty of clearance on each side.

Ceiling Math

To stack two cars, you need:

Car A Height + Car B Height + 10" (Runway + Clearance)

Example: 2020 Mustang (55") + 1969 Camaro (51") + 10" = 116 inches (9.6 feet)

If your ceiling is 9 feet (108"), you CANNOT stack these two cars with this lift. You would need a "Low Profile" modification or shorter cars.

Fit & setup

The HD-9 is freestanding, so it doesn’t have to bolt down — but it needs flat, sound concrete and enough ceiling for the 88-inch columns plus your vehicle. Optional casters let you roll it. See how it stacks up in our best 4-post lifts guide, or browse all 4-post lifts.

BendPak 4 ($6,095) vs. AMGO ® ($6,210)

Save $115.00 with the BendPak

FeatureBENDPAK 4AMGO ®
Lock Spacing 4 in Not specified
Lifting Capacity 9,000 lbs 12,000 lbs
Power 220V 220V

The Lab Take:

If this is for a commercial shop where liability is key, or if you are parking a $100k car underneath, buy the BendPak. The build quality and brand reputation justify the premium.

If you are storing a daily driver and budget is tight, the AMGO will get the job done, but expect some compromises on fit and finish.

Year 1 Maintenance Schedule

Owning a lift is like owning a car. You can’t just install it and ignore it.

Weekly

Wipe down the inside of the columns. Dust mixed with grease turns into a grinding paste that wears out your slider blocks. Check for debris around the runways and base plates.

Monthly

Check Cable Tension. You will hear the locks “clicking” as the lift goes up. If one corner clicks later than the others, that cable is loose. Tighten the nut on top of that specific column to level it out. Inspect the safety locks for proper engagement.

Yearly

Inspect the hydraulic hoses for dry rot or cracks. Grease the pulleys (sheaves) if they do not have sealed bearings. Check all bolts and fasteners for tightness. Verify hydraulic fluid levels and condition.

Complete Technical Specifications


Specification

Value

Note

Lifting Capacity

9000 Ibs

Good for: Light Duty Trucks, SUVs, Sedans

Overall Length

Measure from garage door to back wall

Overall Width

Fits in standard single car bay

Drive-Through Width

100.25”

Restrictive – tight for wide vehicles

Max Rise Height

70”

For car stacking calculations

Motor

Requires 30 Amp Breaker – NOT 110V compatible

Rise Time

50 Sec

Slower than 2-post lifts (30-40 sec)

Concrete Req.

4.25” Min Depth

Standard Residential Slab is usually 4″

Concrete PSI

3000PSI

Must be fully cured (28 days minimum)

Customer Builds

Real installations from real garages

Customer Install #1

Customer Install #2

Customer Install #3