BendPak Narrow-Width, High-Rise 4-Post Car Lift, 9000-Lb. Capacity, Model# HD-9STX
Model: HD-9STX
Key Specifications
9000 lbs
Capacity
50 Sec
Rise Time
220V
Power
70”
Max Rise
$6295.00
– Ships in 2-3 Business Days
Fitment Check
”
Narrow Bay Compatible
”
Standard Garage Depth
4.25”
Depth @ 3000 PSI
65”
For SUV parking below
Product Description:
The Lab Verdict
Executive Summary
80
/100
The Verdict:
The BendPak HD-9STX solves a specific bay problem: tall ceiling, tight width. It delivers the same 82-inch high rise as the extra-tall XW but in a narrower 100-inch-wide frame, so it slots into a bay where a wider lift won’t. Same 9,000 lb capacity and drive-on runways as the standard HD-9; you’re trading floor width for height. For high-ceiling shops short on room side-to-side, it’s the smart pick.
- Homeowners wanting to double their garage parking capacity
- Car collectors who need to stack vehicles for storage
- DIY enthusiasts who perform oil changes and basic maintenance
- Anyone who wants the safest, easiest-to-use lift type
- Owners of full-size trucks and SUVs
- Users who need to do wheel-off suspension work (unless you buy bridge jacks)
- Anyone without at least 4″ of cured concrete
- Owners of extra-wide vehicles like Ford Raptors or duallys
Engineering Analysis
The “Deep Dive”
Hydraulics & Rise Time
An 82-inch rise from a compact footprint — the STX’s 220V power unit drives the taller travel while the narrow frame keeps the lift in a tighter bay.
Safety Lock System
Locks run the full 100-inch column height, letting you set a vehicle high for storage or stand-up service while the narrow frame stays clear of the neighboring bay.
Structural Integrity
Tall and narrow: 82 inches of rise and 100-inch columns in a 100.25-inch-wide frame — the same footprint depth as the base HD-9 but far more height, for high-ceiling shops short on floor width. 9,000 lb, CE-certified.
Complete Technical Specifications
Specification | Value | Note |
|---|---|---|
Lifting Capacity | 9000 Ibs | Good for: Light Duty Trucks, SUVs, Sedans |
Overall Length | ” | Measure from garage door to back wall |
Overall Width | ” | Fits in standard single car bay |
Drive-Through Width | 89.75” | Restrictive – tight for wide vehicles |
Max Rise Height | 70” | For car stacking calculations |
Motor | ” | Requires 30 Amp Breaker – NOT 110V compatible |
Rise Time | 50 Sec | Slower than 2-post lifts (30-40 sec) |
Concrete Req. | 4.25” Min Depth | Standard Residential Slab is usually 4″ |
Concrete PSI | 3000PSI | Must be fully cured (28 days minimum) |
Customer Builds
Real installations from real garages
