HALO LIFTS Clear Floor 2 Post Car Lift – 14,000 LB Capacity

Model: HL2C-14K


Key Specifications

14000 lbs

Capacity

50 Sec

Rise Time

Power

Max Rise

🔧 Professional installation available — find a certified installer near you

$4199.00

  • Free Freight Shipping (Lower 48)

instock

– Ships in 2-3 Business Days

  • Verified Concrete Specs Included
  • Official Warranty

Fitment Check

Total Width

Narrow Bay Compatible

Total Length

Standard Garage Depth

Min. Concrete

Depth @ 3000 PSI

Min. Ceiling

For SUV parking below

Product Description:

The Lab Verdict

Executive Summary

79

/100

The Verdict:

The Halo HL2C-14K is a 14,000-lb clearfloor two-post — the heaviest-capacity lift in Halo’s range, for full-size trucks, duallys, and heavy SUVs. It clears a wide 117.7 inches of drive-through and rises 74 inches on a 220V circuit, standing 156.7 inches overall. If 14,000 lb is more than you need, the HL2C-12K and ALI-certified HL2-10KALIX step down in capacity and price.

  • Who Should Buy It:
  • Owners lifting heavy trucks, duallys, or large SUVs
  • Shops that want maximum two-post capacity
  • Anyone near the limit of a 10–12k lift
  • Who Should Skip It:
  • Cars and light trucks (10–12k costs less)
  • Low-ceiling garages — at 156.7″ it needs real height
  • ⚠️ Lab Note:
At 156.7 inches overall this is a tall lift — confirm your ceiling before ordering.

Engineering Analysis


The “Deep Dive”

Hydraulics & Rise Time

A 220V single-phase (3-wire) power unit drives the carriages on equalized cables through the 74-inch rise.

Safety Lock System

Automatic mechanical locks hold the vehicle on steel stops through the rise; backed by Halo’s 2-year warranty.

Structural Integrity

Clearfloor two-post rated 14,000 lb — Halo’s highest capacity — 156.7″ overall height, 149.1″ wide, 74″ rise, 117.7″ drive-through.

The "Squeeze" Factor

This is the most critical section for the HL2C-14K.

DRIVE-THROUGH WIDTH 117.70"

Let's do the math on a real-world scenario: 2023 Chevrolet Corvette.

Corvette Width (Mirrors Out): ~84"
Clearance: 16.8" per side
The Result:

It fits comfortably with plenty of clearance on each side.

Before it arrives

Check your ceiling against the 156.7-inch height; anchor into at least four inches of cured concrete on a 220V circuit. Compare in our best 2-post lifts guide.

Halo Lifts Clear ($4,199) vs. APlusLift ALI ($4,199)

FeatureHALO LIFTS CLEARAPLUSLIFT ALI
Lifting Capacity 14,000 lbs 10,000 lbs
Power Not specified 220V
Warranty 2-year Warranty Not specified

The Lab Take:

Both lifts are in a similar category. Your decision should come down to specific features that matter most for your use case.

Year 1 Maintenance Schedule

Owning a lift is like owning a car. You can’t just install it and ignore it.

Weekly

Check the Arm Restraints. When the lift is raised, the gears on the arms should lock so they cannot swing. If they slip, adjust the spring tension immediately. Inspect lifting pads for wear.

Monthly

Check the Equalizer Cables. These are the thin cables running across the floor (or overhead). They sync the two carriages. They should be tight like a guitar string. Lubricate the carriage slides.

Yearly

Inspect the rubber lifting pads. If the metal is showing through the rubber, replace the pads. Metal-on-metal contact can slip. Check hydraulic hoses, seals, and anchor bolts. Verify column alignment.

Complete Technical Specifications


Specification

Value

Note

Lifting Capacity

14000 Ibs

Good for: Light Duty Trucks, SUVs, Sedans

Overall Length

Measure from garage door to back wall

Overall Width

Fits in standard single car bay

Drive-Through Width

117.7”

Restrictive – tight for wide vehicles

Max Rise Height

For car stacking calculations

Motor

220 Volt , Single phase, 3 wire Hard Wired”

Requires 30 Amp Breaker – NOT 110V compatible

Rise Time

50 Sec

Slower than 2-post lifts (30-40 sec)

Concrete Req.

” Min Depth

Standard Residential Slab is usually 4″

Concrete PSI

PSI

Must be fully cured (28 days minimum)

Customer Builds

Real installations from real garages

Customer Install #1

Customer Install #2

Customer Install #3