QuickJack 8000TL 8,000lb. Capacity Portable Car Lift Standard Frame
Model: 8000TL
Key Specifications
8000 lbs
Capacity
Sec
Rise Time
110V
Power
24”
Max Rise
$2225.00
– Ships in 2-3 Business Days
Fitment Check
”
Narrow Bay Compatible
”
Standard Garage Depth
”
Depth @ 3000 PSI
”
For SUV parking below
Product Description:
The Lab Verdict
Executive Summary
80
/100
The Verdict:
The QuickJack 8000TL is the standard-frame 8,000-lb portable — the high-capacity model for trucks and SUVs that fit a standard frame length. Same drive-on, fold-flat, 110V design, with 8,000 lb of capacity and roughly 24 inches of rise. For longer trucks that need more frame, the extended 8000TLX; for lighter vehicles, the 6,000-lb 6000TL.
- Mobile mechanics and tire shops
- Home users with low ceiling heights
- Anyone doing primarily wheel and tire service
- Users who need a portable lift solution
- Users who need to do full undercarriage work
- Anyone who needs to raise vehicles to standing height
- Shops that service heavy trucks or commercial vehicles
Engineering Analysis
The “Deep Dive”
Hydraulics & Rise Time
A 110V electric-hydraulic power unit raises both heavy-duty frames in sync through a single control.
Safety Lock System
Automatic safety locks engage as the frames rise and hold the load on mechanical steel bars rather than hydraulic pressure — the standard for this class of portable lift.
Structural Integrity
Standard-frame portable lift rated 8,000 lb, ~24-inch rise, 110V — high capacity for trucks and SUVs, folds flat for storage.
Complete Technical Specifications
Specification | Value | Note |
|---|---|---|
Lifting Capacity | 8000 Ibs | Good for: Light Duty Trucks, SUVs, Sedans |
Overall Length | ” | Measure from garage door to back wall |
Overall Width | ” | Fits in standard single car bay |
Drive-Through Width | ” | Restrictive – tight for wide vehicles |
Max Rise Height | 24” | For car stacking calculations |
Motor | ” | Requires 30 Amp Breaker – NOT 110V compatible |
Rise Time | Sec | Slower than 2-post lifts (30-40 sec) |
Concrete Req. | ” Min Depth | Standard Residential Slab is usually 4″ |
Concrete PSI | PSI | Must be fully cured (28 days minimum) |
Customer Builds
Real installations from real garages
