BendPak GrandPrix™ GP-10C Clearfloor 2 Post Lift 10,000 Lbs

Model: GP-10C


Key Specifications

10000 lbs

Capacity

65 Sec

Rise Time

220 VAC / 60Hz / 1 Ph

Power

76.5”

Max Rise

🔧 Professional installation available — find a certified installer near you

$4195.00

  • Free Freight Shipping (Lower 48)

instock

– Ships in 2-3 Business Days

  • Verified Concrete Specs Included
  • Official Warranty

Fitment Check

Total Width

Narrow Bay Compatible

Total Length

Standard Garage Depth

Min. Concrete

4”

Depth @ 3000 PSI

Min. Ceiling

71.5”

For SUV parking below

Product Description:

The Lab Verdict

Executive Summary

78

/100

The Verdict:

The BendPak GP-10C is a 10,000-lb clearfloor two-post lift and the value anchor of BendPak’s two-post range (now sold under the APEX line). Clearfloor means the columns tie together overhead, so nothing crosses the bay floor to trip over or block a rolling toolbox. Symmetric or asymmetric arm placement lets you center the vehicle or shift it back for easier door clearance. It reaches 70 inches of rise for full stand-up work underneath, runs on a 220V single-phase circuit, and stands 148 inches tall. At its price it’s one of the most accessible ways into a genuine clearfloor two-post.

  • Who Should Buy It:
  • Professional mechanics and shop owners
  • Serious DIYers who do suspension, brake, and exhaust work
  • Anyone who needs full undercarriage access
  • Users willing to drill anchor holes into concrete
  • Commercial shops servicing trucks and fleet vehicles
  • Who Should Skip It:
  • Anyone who cannot drill into their concrete floor
  • Users with concrete less than 4″ thick or with major cracks
  • People who want a simple, no-install solution
  • ⚠️ Lab Note:
This unit requires a 220V/230V connection. Most homes do not have this outlet in the garage. You may need an electrician to install a dedicated circuit.

Engineering Analysis


The “Deep Dive”

Hydraulics & Rise Time

A 220-volt single-phase electric-hydraulic power unit drives the GP-10C, with equalized cables keeping the two carriages level as they travel. The clearfloor layout routes the equalization overhead, leaving the floor between the columns completely open.

Safety Lock System

Column-mounted safety locks catch the carriages at intervals through the lift and hold the vehicle on mechanical stops. Automatic arm restraints keep the swing arms from drifting once a vehicle is loaded.

Structural Integrity

Clearfloor, symmetric/asymmetric two-post design with 114.5 inches between the columns and 103 inches of drive-through clearance — wide enough for most trucks and vans. Rated at 10,000 lb and backed by a 36-month warranty.

The "Squeeze" Factor

This is the most critical section for the BendPakGP-10C.

DRIVE-THROUGH WIDTH 114.50"
CLEARANCE HEIGHT 72"

Let's do the math on a real-world scenario: 2023 Chevrolet Corvette.

Corvette Width (Mirrors Out): ~84"
Clearance: 15.2" per side
The Result:

It fits comfortably with plenty of clearance on each side.

Ceiling Math

To stack two cars, you need:

Car A Height + Car B Height + 10" (Runway + Clearance)

Example: 2020 Mustang (55") + 1969 Camaro (51") + 10" = 116 inches (9.6 feet)

If your ceiling is 9 feet (108"), you CANNOT stack these two cars with this lift. You would need a "Low Profile" modification or shorter cars.

Before it arrives: power, ceiling, and concrete

Ceiling: the GP-10C stands 148 inches (about 12.3 ft) overall — confirm your ceiling clearance covers that plus the vehicle. Power: a dedicated 220V single-phase circuit at the lift. Concrete: like all two-post lifts it anchors into the slab and needs at least four inches of reinforced, cured concrete. This is a professional install, not a weekend job.

BendPak GrandPrix™ ($4,195) vs. APlusLift ALI ($4,199)

Save $4.00 with the BendPak

FeatureBENDPAK GRANDPRIX™APLUSLIFT ALI
Lifting Capacity 10,000 lbs 10,000 lbs
Power 220 VAC / 60Hz / 1 Ph 220V
Warranty 36-month Warranty Not specified

The Lab Take:

If this is for a commercial shop where liability is key, or if you are parking a $100k car underneath, buy the BendPak. The build quality and brand reputation justify the premium.

If you are storing a daily driver and budget is tight, the Plus will get the job done, but expect some compromises on fit and finish.

Year 1 Maintenance Schedule

Owning a lift is like owning a car. You can’t just install it and ignore it.

Weekly

Check the Arm Restraints. When the lift is raised, the gears on the arms should lock so they cannot swing. If they slip, adjust the spring tension immediately. Inspect lifting pads for wear.

Monthly

Check the Equalizer Cables. These are the thin cables running across the floor (or overhead). They sync the two carriages. They should be tight like a guitar string. Lubricate the carriage slides.

Yearly

Inspect the rubber lifting pads. If the metal is showing through the rubber, replace the pads. Metal-on-metal contact can slip. Check hydraulic hoses, seals, and anchor bolts. Verify column alignment.

Complete Technical Specifications


Specification

Value

Note

Lifting Capacity

10000 Ibs

Good for: Light Duty Trucks, SUVs, Sedans

Overall Length

Measure from garage door to back wall

Overall Width

Fits in standard single car bay

Drive-Through Width

114.5”

Restrictive – tight for wide vehicles

Max Rise Height

76.5”

For car stacking calculations

Motor

Requires 30 Amp Breaker – NOT 110V compatible

Rise Time

65 Sec

Slower than 2-post lifts (30-40 sec)

Concrete Req.

4” Min Depth

Standard Residential Slab is usually 4″

Concrete PSI

3000PSI

Must be fully cured (28 days minimum)

Customer Builds

Real installations from real garages

Customer Install #1

Customer Install #2

Customer Install #3