BendPak 10AP Adaptable Clearfloor Adj-Width ALI 2 Post Lift 10,000 Lb. – New
Model: 10AP
Key Specifications
10000 lbs
Capacity
45 Sec
Rise Time
220 VAC / 60 Hz. / 1Ph
Power
69”
Max Rise
$5770.00
– Ships in 2-3 Business Days
Fitment Check
”
Narrow Bay Compatible
”
Standard Garage Depth
4”
Depth @ 3000 PSI
69”
For SUV parking below
Product Description:
The Lab Verdict
Executive Summary
83
/100
The Verdict:
The BendPak 10AP is a 10,000-lb ALI-certified clearfloor two-post lift — the standard-rise sibling of the high-rise 10APX. It shares the same Bi-Metric adaptable arms, which load symmetrically or asymmetrically, and an adjustable column width (108.5 or 118.5 inches inside) so you can set it for a tight two-car bay or a wider truck. ALI certification means third-party testing to the ANSI safety standard — the credential that separates shop-grade from bargain. It rises about 69 inches for full undercarriage access and stands 145 inches overall. If you want the 10APX build without the extra-tall rise, this is it.
- Professional mechanics and shop owners
- Serious DIYers who do suspension, brake, and exhaust work
- Anyone who needs full undercarriage access
- Users willing to drill anchor holes into concrete
- Commercial shops servicing trucks and fleet vehicles
- Anyone who cannot drill into their concrete floor
- Users with concrete less than 4″ thick or with major cracks
- People who want a simple, no-install solution
Engineering Analysis
The “Deep Dive”
Hydraulics & Rise Time
Equalized cables keep the two carriages synchronized through the full 69-inch rise, and a single-point release lowers the lift from one side. The clearfloor design keeps the bay open with no floor beam between the columns.
Safety Lock System
As an ALI-certified lift, the 10AP meets the ANSI/ALI safety standard. Automatic carriage locks engage at intervals and hold the vehicle on mechanical stops rather than on hydraulic pressure.
Structural Integrity
Adaptable clearfloor two-post with adjustable inside width (108.5 or 118.5 inches) and Bi-Metric swing arms that reconfigure for short and long wheelbases. Rated 10,000 lb and backed by BendPak’s 5-2-1 warranty.
Complete Technical Specifications
Specification | Value | Note |
|---|---|---|
Lifting Capacity | 10000 Ibs | Good for: Light Duty Trucks, SUVs, Sedans |
Overall Length | ” | Measure from garage door to back wall |
Overall Width | ” | Fits in standard single car bay |
Drive-Through Width | 92” | Restrictive – tight for wide vehicles |
Max Rise Height | 69” | For car stacking calculations |
Motor | ” | Requires 30 Amp Breaker – NOT 110V compatible |
Rise Time | 45 Sec | Slower than 2-post lifts (30-40 sec) |
Concrete Req. | 4” Min Depth | Standard Residential Slab is usually 4″ |
Concrete PSI | 3000PSI | Must be fully cured (28 days minimum) |
Customer Builds
Real installations from real garages
